IBM System Storage TS2900, Руководство по установке, эксплуатации и обслуживанию

Страница: 213 / 257

Appendix D. Sense Data
D-3
* This code is preserved only in the library log when “FID” or “ATTN DRV”
message is received from the tape drive. This code is not reported to the host
server.
** This code is preserved only in the library log. This code is not reported to the host
server.
Tape Drive Sense Data
Aborted
Command
(0B)
41 nn LDI command failure**
Table D-2. Library sense data (continued)
Sense Key ASC ASCQ Description
Table D-3. Ultrium Tape drive sense data
Byte
Bit Address or Name
7 6 5 4 3 2 1 0
0 Valid
Address Bit
Error Code
1 Segment Number x’00’
2 Filemark EOM
(End of
medium)
ILI
(Incorrect
length
indicator
Reserved Sense Key
See “Sense Key Definitions” on page D-1.
3 Information byte (most significant byte)
4–5 Information bytes
6 Information byte (least significant byte)
7 Additional sense length
8–11 Command specific information bytes
12–13 Additional Sense Code (ASC)
Additional Sense Code Qualifier (ASCQ)
Byte 12 Byte 13
ASC ASCQ
00 00 No additional sense - The flags in the sense data indicate the reason for the command
failure
00 01 Filemark detected - A Read or Space command terminated early due to an FM. The FM
flag is set.
00 02 EOM - A Write or Write File Marks command failed because the physical end of tape was
encountered, or a Read or Space command encountered EOM. The EOM flag is set.
00 04 BOM - A space command ended at Beginning of Tape. The EOM bit is also set.
00 05 EOD - Read or Space command terminated early because End of Data was encountered.
04 00 Cause not reportable - A cartridge is present in the drive, but it is in the process of being
unloaded.
04 01 Becoming Ready - A media access command was received during a front panel initiated
load or an immediate reported load command.
04 02 Initializing Command Required - A cartridge is present in the drive, but is not logically
loaded. A Load command is required.
04 03 Manual Intervention Required - A cartridge is present in the drive but could not be
loaded or unloaded without manual intervention.
0C 00 Write Error - A Write operation has failed. This is probably due to bad media, but may be
hardware related.
11 00 Unrecovered Read Error - A Read operation failed. This is probably due to bad media,
but may be hardware related.