IBM System Storage TS2900, Руководство пользователя

Страница: 33 / 130

Managing
The user roles are manually assigned to user accounts created within the library. Controlling access to screens and operations within the library preserves the integrity of
the library and the data that is stored within the library.
There are four types of user roles for accessing the library with the Web User Interface:
User is allowed to monitor the library, but not complete actions that affect the physical library.
Superuser is allowed to operate the physical and logical library, but not complete actions that affect the library configuration.
Administrator user is allowed access to the entire physical library and logical library, including configuration. Only one administrator user must be assigned the login
name admin.
Service user is allowed access to the entire physical library and logical library. In addition, the Service user account can access diagnostic tools to help identify and
resolve library and drive problems.
Note:
The admin role is the default for the library. However, the administrator can create other access user roles for servicing or using the library.
Multiple users can log in to the Web User Interface. A user can be logged in to only one interface at a time.
For a comparison on user role access privileges, see Web User Interface functions and roles .
The Web User Interface
With the Web User Interface, you can monitor, configure, and operate most library functions from a web browser.
The Operator Panel
With the Operator Panel, you can monitor, configure, and operate library functions from the library front panel.
Locating management functions
The Web User Interface
With the Web User Interface, you can monitor, configure, and operate most library functions from a web browser.
When possible, use the Web User Interface as the primary library interface. The web interface provides access to more features and is intuitive to use.
Before the library can be managed over a network with the Web User Interface, set up the initial network configuration of the library with the Operator Panel. For more
information, see
Configuring network settings .
Logging in
1. Open a supported web browser and enter the IP address of the library.
The IP address can be obtained with the View Current Information command from the Operator Panel. For example,
https://192.168.1.1
.
2. Type in the username (
admin
or other administrator-created user) and the password.
3. Click Login.
For more information about initial logging in to the Web User Interface, see Logging in to the Web User Interface .
The Library main screen on the Web User Interface
Figure 1 shows the Web User Interface window for an Administrator account.
Figure 1. Administrator account window
28 TS2900 Tape Autoloader