Description,
Feature Code
(FC), and Part
Number (PN)
Plug Standard
Reference
Country or Region
Index Number
*Low Voltage
**High Voltage
Network requirements
The library supports an independent customer network.
It is the customer’s responsibility to provide the proper length Ethernet cable for this connectivity. The library has an Ethernet port, see
. This connection allows
remote viewing and management of the library with the Web User Interface.
Supported browsers
IBM® supports higher versions of the browsers if the vendors do not remove or disable functions that the product relies upon. For browser levels higher than the versions
that are certified with the product, customer support accepts usage-related and defect-related service requests. As with operating system and virtualization
environments, if IBM support cannot re-create the issue in the lab, the client might be asked to re-create the problem on a certified browser version to determine whether
a product defect exists. Defects aren’t accepted for cosmetic differences between browsers or browser versions that do not affect the functional behavior of the product.
If a problem is identified in the product, defects are accepted. If a problem is identified with the browser, IBM might investigate potential solutions or workarounds that
the client can implement until a permanent solution becomes available.
Supported interfaces
The library supports the following TCP/IP protocols:
IPv4 and IPv6 support
The library supports Internet Protocol (IP) addresses in both IPv4 and IPv6 format.
Simple Network Management Protocol (SNMP)
SNMP traps are supported for drive and library events. SNMP management query functions are supported by using a standard Management Information Block
(MIB).
Hyper Text Transfer Protocol (HTTP)
An embedded web server provides a management GUI for library management and query capabilities.
Secure Socket Layer (SSL)
The library supports SSL, a protocol for transmitting private documents through the internet.
Simple Mail Transfer Protocol (SMTP)
The library supports SMTP for sending email alerts.
Network Time Protocol (NTP)
The library supports NTP for external time-and-date synchronization.
Domain Name System (DNS)
The library supports DNS for flexible IP addressing.
Dynamic Host Configuration Protocol (DHCP)
The library supports DHCP for automatically providing an Internet Protocol (IP) host with its IP address and other related configuration information, such as the
subnet mask and default gateway.
Host requirements
The library is supported by a wide variety of servers, operating systems, and adapters. Many ways to determine the servers and software that supports this library are
available.
Device drivers enable the drive to interact with various servers.
SAS interface
The SAS interface speed varies with the generation of the LTO drive. See
to find out SAS speed of different drive generations.
A drive with a SAS interface can be linked directly to a host server. SAS is a performance improvement over traditional SCSI because SAS enables multiple devices (up to
128) of different sizes and types to be connected simultaneously with thinner and longer cables. Its full-duplex signal transmission supports up to 12 Gbps. In addition,
SAS drives can be hot-plugged.
SAS drives auto-negotiate speed. There are no configurable topologies thus no feature switches are associated with SAS.
Compatible configurations
16
TS2900 Tape Autoloader
Содержание System Storage TS2900
Страница 1: ...TS2900 Tape Autoloader IBM...
