IBM System Storage N3700, Руководство по аппаратуре и обслуживанию

Страница: 36 / 106

Table 4. Console adapter pin number connections
DB-9 male
Connects
to
RJ-45
Pin number Signal Pin number Signal
1 Not connected - 1 Not connected
4 Not connected - 2 Not connected
3 TXD 3 TXD
5 GND 4 GND
6 Not connected - 5 Not connected
2 RXD 6 RXD
7 Not connected - 7 Not connected
8 Not connected - 8 Not connected
9 Not connected - - -
Connecting to an ASCII terminal console
To connect an ASCII terminal console to the N3700 storage system, complete the
following steps.
1. Use the following communications parameters.
Table 5. Communication parameters
Parameter Setting
Baud 9600
Data bit 8
Parity None
Stop bits 1
Flow control None
Note: See your terminal documentation for information about changing your
ASCII console terminal settings.
2. Connect a DB-9 serial cable to the DB-9 end of the DB-9 to RJ-45 console
adapter. Then connect the RJ-45 end of the console adapter to the console port
on the N3700 storage system CPU module. Finally, connect the other end of the
serial cable to the ASCII terminal.
10
IBM System Storage N series: N3700 Hardware and Service Guide