Customer-supplied items needed for setup:
!
!
!
!
!
Ethernet LAN cables
Fibre Channel cables
Console (for example, a PC or laptop)
#2 Phillips screwdriver and slotted screwdriver
ESD wrist strap
1
This document provides installation and setup instructions for the IBM System
Storage N3300 storage system. Additional information about this product can
be found in the
. Additional information about expansion units can be found in the
and
for your
expansion units.
®
IBM System Storage N3300 and N3600 Hardware and Service
Guide
Installation and Setup Instructions
Hardware and Service Guide
Need help?
If you encounter any difficulties while setting up your system, contact IBM
service and support for assistance. Information can also be found at the
following Web site:
www.ibm.com/storage/support/nas/
TM
Read the safety notices:
Before continuing, make sure that you have reviewed the safety notices on the
documentation CD that came with this system. Do not plug any cables into the
system, adapters, or any electrical outlets until you have reviewed the safety
information and followed the procedures in this document.
IMPORTANT:
The following instructions are for a basic configuration with onboard ports set to
initiator mode.
IMPORTANT:
The rack installation instructions provided in this document apply specifically to
the installation of the N series product in an IBM 19-inch rack. IBM service
personnel cannot install the N series product in a non-IBM rack.
If the N series product is being installed in a non-IBM rack, the rails shipped with
the N series product may or may not work with the non-IBM rack. Physical
installation of the N series product in a non-IBM rack is the customer's
responsibility.
Содержание System Storage N3300
Страница 1: ...N3300 Installation and Setup Instructions IBM System Storage...
Страница 2: ......
