IBM System storage DS6000 Series, Красная книга

Страница: 408 / 578

384
IBM System Storage DS6000 Series: Copy Services with IBM System z
When the creation wizard displays the “Select target volumes” panel (see Figure 26-25),
select from the pull-down lists the
Resource type and if necessary its appropriate parameter
to display the list of volumes. If you have chosen the Resource type LSS
,
select from the
pull-down lists the LSS number that contains the target volumes you plan to use. Check the
boxes of the volumes you want to use as target FlashCopy volumes.
Click Next to proceed with the fourth step of this wizard. The creation wizard then displays
the “Select common options” panel; see Figure 26-26.
In this panel, check the box for Enable change recording. This should also automatically
check the box for Make relationship(s) persistent. You can leave the *Sequence number
for these relationships field with its default value, since Global Mirror will take care of it
automatically.
Figure 26-26 FlashCopy creation step 4 - select the common option
Click Next to proceed with last step of this wizard.
The creation wizard then displays the Verification panel; see Figure 26-27 on page 385.
In this panel check all the components of your FlashCopy session definitions and if
necessary, click
Back to correct any of them, or click Finish to validate.
Note: Do
not
select the check box for Initiate background copy.