IBM SY27-0345-06, Руководство по обслуживанию и ремонту

Страница: 125 / 148

If trouble is experienced with this equipment, for repair or warranty information, in
the United States, call IBM at 1-800-IBM-SERV. In Canada, call IBM at
1-800-465-6600.
No repairs can be performed by the customer.
Industry Canada Information
NOTICE: The Industry Canada label identifies certified equipment. This certification
means that the equipment meets certain telecommunications network protective,
operational and safety requirements. Industry Canada does not guarantee the
equipment will operate to the user’s satisfaction.
Before installing this equipment, users should ensure that it is permissible to be
connected to the facilities of the local telecommunications company. The equip-
ment must also be installed using an acceptable method of connection. In some
cases, the company’s inside wiring associated with a single line individual service
may be extended by means of a certified connector assembly (telephone extension
cord). The customer should be aware that compliance with the above conditions
may not prevent degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian mainte-
nance facility designated by the supplier. Any repairs or alterations made by the
user to this equipment, or equipment malfunctions, may give the telecommuni-
cations company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections
of the power utility, telephone lines and internal metallic water pipe system, if
present, are connected together. This precaution may be particularly important in
rural areas.
CAUTION: Users should not attempt to make such connections themselves, but
should contact the appropriate electrical inspection authority, or electrician, as
appropriate.
The load number assigned to each terminal device denotes the percentage of the
total load to be connected to a telephone loop which is used by the device, to
prevent overloading. The termination on a loop may consist of any combination of
devices subject only to the requirement that the total of the load numbers of all the
devices does not exceed 100. The load number of the 14.4 Kbps Modem Port
Feature is 05.
AVIS : L’étiquette d’Industrie Canada permet d’identifier un équipement
homologué. Cette homologation signifie que cet équipement satisfait certaines
exigences en matière de protection, d’exploitation et de sécurité du réseau de
télécommunications. Industrie Canada n’offre aucune garantie que le
fonctionnement de cet équipement soit à la satisfaction de l’utilisateur.
Avant d’installer cet équipement, l’utilisateur doit s’assurer qu’il a la permission de
le raccorder aux installations de l’entreprise de télécommunications. L’installation
de cet équipement doit aussi se faire selon un mode de raccordement acceptable.
Dans certains cas, le câblage interne de l’entreprise associé au service individuel
offert par une ligne d’abonné peut être prolongé au moyen d’un connecteur
homologué (prolongateur de téléphone). Le client devrait être informé que la
Appendix D. Notices
D-5