IBM Storwize V7000, Введение и руководство по внедрению

Страница: 32 / 670

12
IBM Flex System V7000 Storage Node Introduction and Implementation Guide
򐂰 Ten fan modules (eight 80 mm fan modules and two 40 mm fan modules).
򐂰 Four physical I/O modules.
򐂰
An I/O architectural design capable of providing:
– Up to 8 lanes of I/O to an I/O adapter card; each lane capable of up to 16 Gbps
– A maximum of 16 lanes of I/O to a half wide-node with two adapters
– A wide variety of networking solutions including Ethernet, Fibre Channel, FCoE, and
InfiniBand
򐂰 Up to two IBM Flex System Manager (FSM) management appliances for redundancy. The
FSM provides multiple-chassis management support for up to four chassis.
򐂰 Two IBM Flex System Chassis Management Module (CMMs). The CMM provides
single-chassis management support.
The chassis can be configured with the following information about the chassis location:
򐂰
Rack Room
򐂰
Rack Location
򐂰
Position in Rack (the lowest Rack Unit occupied by the Chassis)
򐂰
Chassis Name
򐂰
Bay ID
Individual components will then be able to work out their bay in the chassis, the IBM Flex
System V7000 Storage Node enclosure uses 4 bays (double wide and double tall) per
enclosure and will report its bay as the lowest left bay that it occupies.
Figure 1-5 shows the rear of the chassis where the I/O modules and chassis management
modules can be seen.
Figure 1-5 Rear view of the IBM Enterprise Flex System Chassis