IBM Storwize V5000 Gen2, Быстрое руководство по установке

Страница: 70 / 178

Figure 32. Support rails
2. Select an available 5U space in your rack to install the expansion enclosure.
Important notes:
• When you select a rack location, ensure that the enclosure and its parts are easily accessible. Allow
enough space for the lid to be easily removed and for internal components, such as drives and
secondary expansion modules, to be serviced.
• When all components and drives are installed, the expansion enclosure is heavy. Install the support
rails and enclosure at the lowest available position. Do not install the rails and enclosure above
position U25 in the rack.
3. Remove the inner member of the rail. Push the tab ( a ) and slide the middle rail member back, as
shown in Figure 33 on page 44.
Figure 33. Detaching the inner rail section
4. Use four M4 screws to attach the inner rail to the side of the enclosure. Figure 34 on page 45 shows
the screw locations.
44 Storwize V5000 Gen2: Quick Installation Guide