IBM SP3001, Руководство по конфигурации оборудования

Страница: 33 / 50

Appendix. Safety, environmental, and electronic emissions
notices
Safety notices may be printed throughout this guide. DANGER notices warn you of conditions or
procedures that can result in death or severe personal injury. CAUTION notices warn you of conditions
or procedures that can cause personal injury that is neither lethal nor extremely hazardous. Attention
notices warn you of conditions or procedures that can cause damage to machines, equipment, or
programs.
DANGER notices
DANGER
To prevent a possible shock from touching two surfaces with different protective ground (earth),
use one hand, when possible, to connect or disconnect signal cables. (D001)
DANGER
Overloading a branch circuit is potentially a fire hazard and a shock hazard under certain
conditions. To avoid these hazards, ensure that your system electrical requirements do not exceed
branch circuit protection requirements. Refer to the information that is provided with your device
or the power rating label for electrical specifications. (D002)
DANGER
If the receptacle has a metal shell, do not touch the shell until you have completed the voltage and
grounding checks. Improper wiring or grounding could place dangerous voltage on the metal shell.
If any of the conditions are not as described, STOP. Ensure the improper voltage or impedance
conditions are corrected before proceeding. (D003)
DANGER
An electrical outlet that is not correctly wired could place hazardous voltage on the metal parts of
the system or the devices that attach to the system. It is the responsibility of the customer to ensure
that the outlet is correctly wired and grounded to prevent an electrical shock. (D004)
DANGER
© Copyright IBM Corp. 1994, 2013
27