IBM Slicestor 2448, Инструкция по эксплуатации прибора

Страница: 35 / 46

6. Replace the drive.
7. Insert the new drive tray into the drive bay until it is fully inserted and clicks into place.
8. Plug in the power cable and network cables.
9. Power on the appliance.
10. For drives with no OS installed, see Install an operating system on a drive.
Install an operating system on a drive
Note: To install an operating system (OS) on a drive, you need a USB flash drive, a computer that is
running a Linux OS, a VGA-capable monitor, and a USB keyboard.
CAUTION:
The following procedure destroys any existing data on the USB flash drive.
1. Download the installation ISOs from IBM.
2. Insert the USB flash drive into the computer.
3. Determine the name of this drive.
#lsblk
4. Determine that the drive is not mounted.
#mount
5. Copy the ClevOS ISO to the USB flash drive.
#dd if=/{path}/{ClevOS}.iso of=/dev/{drivename} bs=1M
6. When copying is done, remove the USB flash drive from the computer.
7. Power down the device on which you want to install the OS.
v If the device is in an unresponsive state, it can be powered down by PDU or by removing the
power cables.
v If the device is still responding, do the following steps.
a. Log in to the device as
localadmin
.
b. At the command prompt, type poweroff /
8. Attach the USB keyboard and VGA monitor to the device.
9.
Insert the USB flash drive in the remaining USB port.
10. Restart the machine while pressing F11 to enter the boot menu.
11. In the boot menu, select USB Key and press Enter. The device loads the operating system, and the
installer appears.
12. In the installer, choose OS only install. When installation completes, the device reboots.
13. After the device reboots, remove the USB flash drive.
Figure 12. Removing a boot drive
Chapter 5. Field replaceable or upgrade units
17