IBM ServeRAID, Справочник пользователя

Страница: 91 / 226

3. Mount the CD-ROM drive. From the console, type the following and press Enter:
mount -f ISO9660 -o ro,lower / dev / cd0 / mnt
where / dev / cd0 is the specific device file for the CD-ROM block device. If you
have more than one CD-ROM drive, you must replace / dev / cd0 with the specific
name of the CD-ROM drive you want to use.
Note: If you currently have another device mounted on / mnt , you must create a
new directory and substitute its name for / mnt in these instructions.
4. Copy IPSSEND to your hard disk. Type the following and press Enter:
cp /mnt/openserv/cmdline/ipssend /usr/bin
5. Change the access permissions. Type the following and press Enter:
chmod 700 /usr/bin/ipssend
6. Unmount the CD-ROM drive. Type the following and press Enter:
umount / mnt
7. Remove the CD from the CD-ROM drive.
Installing IPSSEND for OpenServer from diskette
Complete the following steps to install IPSSEND for OpenServer using the IBM
ServeRAID Support for SCO OpenServer diskette:
1. Start the server.
2. After the operating system starts, insert the IBM ServeRAID Support for SCO
OpenServer diskette into the diskette drive.
3. Mount the diskette drive. From the console, type the following and press Enter:
mount -f S51K /dev/fd0 /mnt
where / dev / fd0 is the specific device file for the diskette drive block device. If
you have more than one diskette drive, you must replace / dev / cd0 with the
specific name of the diskette drive you want to use.
Note: If you currently have another device mounted on /mnt, you must create a
new directory and substitute its name for /mnt in these instructions.
4. Copy IPSSEND to your hard disk. Type the following and press Enter:
cp /mnt/ipssend /usr/bin/ipssend
5. Unmount the diskette drive. Type the following and press Enter:
umount /mnt
where /mnt is the directory you mounted in step 3.
6. Remove the diskette from the diskette drive.
7. Change the access permissions. Type the following and press Enter:
chmod 700 /usr/bin/ipssend
Chapter 8. Installing and using the IPSSEND command-line program
75