IBM ServeRAID-4 Ultra160 Series, Справочник пользователя

Страница: 55 / 208

b. Some operating systems have size limitations for logical drives. Before you
save the configuration, verify that the size of the logical drive is appropriate
for your operating system. See your operating-system documentation for
more detailed information.
c. Typically, the first logical drive defined on the first ServeRAID controller
found by system BIOS during startup will be your startup (boot) drive.
11. If free space is available and you want to define another logical drive, click
Add in the Main Panel.
12. Repeat steps 9 on page 36 through step 11 for each logical drive that you want
to define in this array; then, go to step 13.
13. If you are defining multiple arrays, click the next New array tree node; then,
repeat steps 9 on page 36 through 12. When you are finished, go to step 14.
14. Click Next. The Configuration summary window opens.
15. Review the information that displays in the Configuration summary window.
Figure 14. Adding another logical drive
Chapter 4. Configuring ServeRAID controllers
37