IBM ServeRAID-4 Ultra160 Series, Справочник пользователя

Страница: 14 / 208

“Chapter 11. Introduction to IBM ServeRAID Cluster Solution” on page 91 and
“Chapter 12. Preparing to install or change a cluster solution” on page 95 provide
general information about the IBM ServeRAID Cluster Solution, as well as terms,
definitions, and considerations.
“Chapter 13. Configuring ServeRAID controllers for clustering” on page 99 explains
the procedure for configuring ServeRAID controllers for clustering when using
Microsoft Cluster Service, Vinca High Availability for Novell IntranetWare, or Novell
High Availability Server.
“Chapter 14. Installing the Microsoft Cluster Service software” on page 107 provides
the procedure for installing Microsoft Cluster Service on Windows 2000 and
Windows NT 4.0.
“Chapter 15. Monitoring and updating an IBM ServeRAID Cluster Solution” on
page 123 contains information for monitoring and updating an IBM ServeRAID
Cluster Solution.
“Chapter 16. Obtaining ServeRAID updates” on page 131 and “Chapter 17.
Updating the ServeRAID BIOS, firmware, and software code for clustering” on
page 133 provide information for obtaining IBM ServeRAID and IBM ServeRAID
Cluster Solution updates from the World Wide Web.
“Chapter 18. Solving ServeRAID problems” on page 135 describes the ServeRAID
POST error codes and startup messages. This chapter also includes some basic
information for rebuilding a defunct drive and troubleshooting failover and cluster
problems.
“Chapter 19. Getting help, service, and information” on page 159 provides
information about accessing the IBM HelpCenter
®
and World Wide Web sites to
obtain future code and information updates for the ServeRAID controller.
“Product warranties and notices” on page 169 contains warranty information,
product notices, and trademarks.
Notices that are used in this book
This book contains notices to highlight information as follows:
v
Notes: These notices provide important tips, guidance, or advice.
v
Attention: These notices indicate possible damage to programs, devices, or
data. An attention notice is placed just before the instruction or situation in which
damage could occur.
v
Caution: These notices indicate situations that can be potentially hazardous to
you. A caution notice is placed just before descriptions of potentially hazardous
procedure steps or situations.
IBM ServeRAID Support CD
The IBM ServeRAID Support CD contains the following:
v
ServeRAID Manager program. Use this program to configure arrays and logical
drives using ServeRAID controllers. This program is available in the following
directory:
d :/PROGRAMS/ operatingsystem /MANAGER
xii
IBM
®
User’s Reference: ServeRAID
™
-4 Ultra160 SCSI Controller