IBM SelectaDock II, Руководство по техническому обслуживанию аппаратной части

Страница: 30 / 67

Diagnostic Error Codes
A detected error is shown as in the following example:
Ÿ
A large X to the left of the device icon
Ÿ
Device ID (three digit)
Ÿ
FRU code (four digit)
Ÿ
Error code (two digit)
The device ID and error code are used to indicate the
detail portion of the FRU which caused the error. If
replacing a FRU does not correct the problem, see the
device ID or error code from the previous failure. If they
have changed, the cause might be because the new FRU
is defective or that the FRU was incorrectly installed.
Device ID:
If an error is detected by the diagnostic
tests, a three digit device ID is displayed. The device ID
indicates suspected device.
Icon Device
ID Suspected Device
SystemBoard
001 System board
003 Keyboard
007 Math coprocessor
086 Pointing device
Memory
002 Memory
Display
050 Display
053 Enhanced video
052 MPEG
HDD-1
1 017 Hard disk drive
HDD-2
2 151 Hard disk in UltraBay
HDD-3
3
067 External Hard disk drive
152 Second external hard disk
drive
21