IBM SAN768B-2, Руководство пользователя

Страница: 63 / 228

Chapter 3. Starting and configuring the SAN768B-2
Attention: Refer to the latest Fabric OS Release Notes for information regarding
Fabric OS compatibility. This is particularly important for fabrics with 1-Gbps
switches using earlier Fabric OS versions. To access the appropriate release notes,
complete these steps.
v
Go to the IBM Support Portal web page http://www.ibm.com/supportportal.
v In the Product finder field, enter 2499 (product machine type) or the product
name.
v
In the displayed product list, select your product.
v
On the displayed product page, click the IBM SAN b-type Firmware Version
7.x Release Notes link.
v
Select the appropriate release note link to download the release note PDF file.
The SAN768B-2 must be configured before it is connected to the fabric, and all of
the configuration commands must be entered through the active CP blade. The
SAN768B-2 configuration includes the following parameters:
v
IP address and subnet mask for the chassis
v IP addresses, host names, subnet masks, and gateway addresses for both CP
blades
v
Switch name
v
Domain ID for the SAN768B-2 (optional)
v
WWN for the SAN768B-2
Note: The SAN768B-2 WWN is initially set by the factory to match the license
ID (which is based on the chassis serial number). The WWN can be changed,
but the license ID cannot be modified.
The configuration information is mirrored to the standby CP blade, which allows
the most current configuration to remain available even if the active CP blade fails.
The configuration information for the SAN768B-2 is stored in the WWN cards and
the flash memory of the CP blades. The configuration can be backed up to a
workstation (uploaded) and then downloaded to the active CP blade if necessary.
Note: If the FS8-18 encryption blade is installed, refer to the Fabric OS Encryption
Administrator’s Guide Supporting Tivoli Key Lifecycle Manager (TKLM) Environments
for the procedures to configure the encryption functions.
Figure 13 on page 36 provides an overview of the sequence of tasks to configure
the SAN768B-2.
© Copyright IBM Corp. 2011, 2014
35
|
|
|
|
|
|
|