IBM SAN512B-6, Инструкция по установке, обслуживанию и эксплуатации

Страница: 257 / 286

iPDU for director attachment:
SAN rack specifications
The physical dimension specifications for the SAN rack are listed in Table 25. An
example weight with two M12 directors installed is also included. (The M12 is
heavier than either the M14 or M48, fully populated.) The total weight of a rack
with directors installed will depend upon which directors are installed. For the
specifications of individual directors, see the respective installation and service
guides.
Table 25. IBM SAN rack specifications
Dimension Value
Height 1785 mm (70.3 in.)
Depth
v
With rear door installed: 1042 mm (41 in.)
v With rear and front door installed: 1098 mm (43.3 in.)
Width
v With side panels installed: 650 mm (25.6 in.)
v Without side panel installed: 623 mm (24.5 in.)
EIA units 36 EIA units
Weight rack 535 lbs
rack with two 8961 Model F08 directors: 535 lbs + 2 x 321.5
Note: The maximum supported configuration for a SAN rack is two directors.
sj002019
Figure 74. iPDU (PN 00FW787) for director attachment
Appendix A. SAN rack
233
|
|
|
|
|
||
|
|
|
|
|
|
|
||
||
||
||
|
||
|
||
||
|
|
|
|