IBM SAN256B-6, Инструкция по установке, обслуживанию и эксплуатации

Страница: 93 / 292

Installing Transceivers and Cables
This topic provides the following information:
v “Supported transceivers and cables”
v “Time and items required” on page 71
v “Precautions specific to transceivers and cables” on page 72
v “Cleaning the fiber-optic connectors” on page 72
v “Cable management” on page 73
v “Installing an SFP+ transceiver” on page 73
v “Replacing an SFP+ transceiver” on page 75
v
“Installing a QSFP transceiver” on page 76
v “Replacing a QSFP transceiver” on page 77
v “Verifying the operation of new transceivers” on page 78
Supported transceivers and cables
The following table is a general reference to the types of transceivers supported on device blades.
Table 15. Supported transceivers and cables
Blade Transceiver Type Auto-negotiate/Fixed Speeds supported
FC32-48 port blade 32 Gbps SFP28, SWL, LWL Auto negotiate 8, 16, 32 Gbps
16 Gbps SFP+, SWL, LWL, ELWL Auto negotiate 4, 8, 16 Gbps
10 Gbps SFP+, SWL, LWL Fixed 10 Gbps
FC32-64 port blade 4x32 Gbps QSFP+, SWL Auto negotiate (each 32
Gbps channel) 4x32 Gbps, 4x16 Gbps
4x16 Gbps QSFP+, SWL Auto negotiate (each 16
Gbps channel) 4x16, 4x8, 4x4 Gbps
128 Gbps CWDM4 2 km QSFP+ for
ISL links Fixed 4x32 Gbps
40 GbE QSFP+ with breakout for
40GBASE SR4 and 10GBASE SR
connectivity over MTP 1x8 or 1x12
cabling Fixed 4x10 GbE (breakout
mode) or 40 GbE
40 GbE QSFP+ for bidirectional SR
connectivity with LC connectors Fixed 40 GbE
100 GbE QSFP28 for SR4
connectivity over MTP 1x12 cabling
This QSFP+ provides 4x25 GbE
connectivity only.
Fixed 4x25 GbE (breakout
mode)
© Copyright IBM Corp. 2018
65
|
|
||
||||
||||
|||
|||
|||
| |
||
| |
|
| ||
|
|
|
| ||
|
|
| ||
|
|
|
|
||
|