IBM SAN192C-6, Инструкция по установке, обслуживанию и эксплуатации

Страница: 130 / 160

AC Power Consumption for the SAN192C-6 Director
Table 28 shows the typical AC power consumption for the SAN192C-6 Director.
Table 28. Consumption for SAN192C-6 Director
Speed/Module Type
Number of Fabric
Modules
Typical AC Power Consumption (Watts)
96 ports 192 ports
32-G Fibre Channel
ports with SAN
c-type 48-port 32
Gbps Switching
Module 6 1244 1764
16-G Fibre Channel
ports with SAN
c-type 48-port
32-Gbps Switching
Module 3 1052 1572
AC Power Supply Requirements for Grid Redundancy
The minimum number of AC PSUs required to achieve grid redundancy on each of
the SAN c-type Directors differ. This number is irrespective of the optics
configured (See Table 5-20 ). Modifications made to the configurations may require
additional PSUs as per Table 29.
Note: The minimum number of AC PSUs required to achieve grid redundancy is
based on the maximum reserved power per chassis for any given configuration.
The actual power consumption will be lower.
Table 29. AC PSU Requirements for Grid Redundancy
Platform Configurations
Minimum PSUs Required
for Grid Redundancy
SAN192C-6 Up to 3 x SAN c-type 48 Port
32 Gbps Fibre Channel
Switching Modules 2
Any other supported module
or a combination of
supported modules:
v 48 Port 32 Gbps Fibre
Channel Switching
Module
v 24/10 port SAN Extension
Module
4
SAN384C-6 Up to 8 x SAN c-type 48 Port
32 Gbps Fibre Channel
Switching Modules 4
Any other supported module
or a combination of
supported modules:
v 48 Port 32 Gbps Fibre
Channel Switching
Module
v 24/10 port SAN Extension
Module
6
106
SAN192C-6, SAN384C-6 and SAN768C-6 Installation, Service, and User Guide