IBM SAN16B-2 - TotalStorage Express Model Switch, Руководство пользователя и обслуживания

Страница: 81 / 93

ROM. See read only memory .
route. As applies to a fabric, the communication path
between two switches. Can also apply to the specific
path taken by an individual frame, from source to
destination. See also Fibre Channel shortest path first .
routing. The assignment of frames to specific switch
ports, according to frame destination.
R_RDY. See receiver ready .
RR_TOV. See resource recovery timeout value .
RS-232 port. An older standard for a port that has
been replaced by EIA/TIA-232-E. Used to connect data
terminal equipment (DTE) and data communications
equipment (DCE) devices for communication between
components, terminals, and modems. See also DB–9
connector , DCE port, and DTE port .
RSCN. See registered state change notification .
rw. Read-write.
S
SAN. See storage area network .
SC. Standard connector.
SCSI. See small computer systems interface .
SCSI Enclosure Services (SES). A subset of the
small computer systems interface (SCSI) protocol used
to monitor temperature, power, and fan status for
enclosure devices.
SDRAM. See synchronous dynamic random access
memory .
Secure Fabric OS. An optionally-licensed software
product that runs on top of the Fabric OS and provides
customizable security restrictions through local and
remote management channels on a switch.
secure sockets layer (SSL). A security protocol that
provides communication privacy. SSL enables
client/server applications to communicate in a way that
is designed to prevent eavesdropping, tampering, and
message forgery.
sequence. A group of related frames transmitted in the
same direction between two node ports (N_ports).
service rate. The rate at which an entity can service
requests. See also request rate .
SES. See SCSI Enclosure Services .
SFP. See small form-factor pluggable .
short wavelength (SWL). A type of fiber optic cabling
that is based on 850 mm lasers and supports 1.0625
Gbps link speeds. Can also refer to the type of gigabit
interface converter (GBIC) or small form-factor
pluggable (SFP). See also long wavelength .
SID. The 3–byte source ID of the originator device, in
the 0xDomainAreaALPA format.
SID-DID. Source identifier-destination identifier.
SIMMS. Single in-line modules.
simple name server (SNS). A switch service that
stores names, addresses, and attributes for up to 15
minutes, and provides them as required to other devices
in the fabric. SNS is defined by Fibre Channel
standards and exists at a well-known address. Can also
be referred to as directory service. See also Fibre
Channel service .
simple network management protocol (SNMP). In
the Internet suite of protocols, a network management
protocol that is used to monitor routers and attached
networks. SNMP is an application layer protocol.
Information on devices managed is defined and stored
in the application’s Management Information Base
(MIB).
single mode. The fiber optic cabling standard that
corresponds to distances of up to 10 km (6.214 mi)
between devices.
small computer systems interface (SCSI). A parallel
bus architecture and a protocol for transmitting large
data blocks up to a distance of 15—25 m (49—82 ft).
small form-factor pluggable (SFP). An optical
transceiver used to convert optical and electrical signals
between optical fiber cables and switches.
SNMP. See simple network management protocol .
SNMPv1. The original standard for SNMP, now labeled
v1.
SNS. See simple name server .
SOF. Start-of-frame.
SSL. See secure sockets layer .
standard translative mode. A hardware translative
mode that allows public devices to communicate with
private devices across the fabric. See also hardware
translative mode and QuickLoop mode .
storage. A device used to store data, such as a disk
or tape.
storage area network (SAN). A network of systems
and storage devices that communicate using Fibre
Channel protocols. See also fabric .
subordinate switch. All switches in the fabric other
than the principal switch. See also principal switch .
Glossary
59