IBM SAN Volume Controller 2145-CG8, Руководство по установке оборудования

Страница: 88 / 110

SAN Volume Controller 2145-CG8 connectors
External connectors that the SAN Volume Controller 2145-CG8 uses include four
Fibre Channel ports, a serial port, two Ethernet ports, and two power connectors.
The 2145-CG8 also has external connectors for the 10 Gbps Ethernet feature.
These figures show the external connectors on the SAN Volume Controller
2145-CG8 back panel assembly.
1
Fibre Channel port 1
2
Fibre Channel port 2
3
Fibre Channel port 3
4
Fibre Channel port 4
5
Power-cord connector for power supply 1
6
Power-cord connector for power supply 2
7
Serial connection for UPS communication cable
8
Ethernet port 2
9
Ethernet port 1
1
10 Gbps Ethernet port 3
2
10 Gbps Ethernet port 4
Figure 47 on page 61 shows the type of connector that is located on each
power-supply assembly. Use these connectors to connect the SAN Volume
Controller 2145-CG8 to the two power cables from the uninterruptible power
supply.
svc00732
3 5 4 1 2 6
7 9 8
Figure 45. Connectors on the rear of the SAN Volume Controller 2145-CG8
svc00731
2 1
Figure 46. 10 Gbps Ethernet ports on the rear of the SAN Volume Controller 2145-CG8
60
SAN Volume Controller: Model 2145-CG8 Hardware Installation Guide