IBM SAN Volume Controller 2145-CG8, Руководство по установке оборудования

Страница: 19 / 110

About this guide
This guide describes the SAN Volume Controller node and provides detailed
installation instructions.
Use this guide to perform the following tasks:
v
Install a new SAN Volume Controller system or extend an existing system.
v
Install one or more SAN Volume Controller nodes and related hardware
components, such as uninterruptible power supply units or an optional
redundant ac-power switch.
v
Connect SAN Volume Controller components to a SAN.
v
Manage connections to an Ethernet network.
v
Verify the completeness of a SAN Volume Controller installation.
The topics within this book provide conceptual, planning, and installation
information for the SAN Volume Controller hardware model that was ordered.
Who should use this guide
The intended audience for this guide is the IBM service representative.
This guide should be read by the IBM service representative who is responsible for
the initial installation of the SAN Volume Controller hardware, including the
redundant ac-power switch and the uninterruptible power supply.
After the IBM service representative has installed the SAN Volume Controller
hardware, the customer must use the
IBM System Storage SAN Volume Controller
Software Installation and Configuration Guide to install any additional software and to
configure the SAN Volume Controller.
Summary of changes for GC27-3923-01, SAN Volume Controller Model
2145-CG8 Hardware Installation Guide
This summary of changes provides a list of new, modified, and changed
information since the last version of the guide. This topic describes the changes to
this guide since the previous edition, GC27-3923-00.
Technical changes or additions to the text and illustrations are indicated by a
vertical line to the left of the change. This summary of changes describes new
functions that have been added to this release.
Changed information
This document contains corrections to hardware planning information. Corrections
include feature code numbers, quantities, part numbers, and whether a feature
code is optional or required.
This document also contains additions and corrections to procedures for installing
the rails for the SAN Volume Controller 2145-CG8 node in a rack. A section
provides procedures for installing the uninterruptible power supply (2145 UPS-1U)
in a rack.
© Copyright IBM Corp. 2012
xix