IBM SAN Volume Controller 2145-8F2, Руководство по установке оборудования

Страница: 30 / 96

SAN Volume Controller 2145-8F4 and SAN Volume Controller
2145-8F2 operator information panel
The operator-information panel contains buttons and indicators such as the release
latch for the light path diagnostics panel, the power-control button, and LEDs that
indicate information such as system-board errors, hard-drive activity, and power
status.
Figure 2 shows the operator-information panel that is used by the SAN Volume
Controller 2145-8F4 and the SAN Volume Controller 2145-8F2 models.
1
Release latch for light path diagnostics panel
2
System-error LED (amber)
3
Information LED (amber)
4
Location LED (blue)
5
Hard disk drive activity LED (green)
6
Power control button
7
Power LED (green)
8
USB connector
Release latch
The release latch on the SAN Volume Controller 2145-8F4 and 2145-8F2 give you
access to the light path diagnostics panel, which provides a method for
determining the location of a problem.
After pressing the release latch on the operator-information panel, you can slide
the light path diagnostics panel out to view the lit LEDs. The LEDs indicate the
type of error that has occurred. See MAP 5800: Light path for more detail.
To retract the panel, push it back into the node and snap it into place.
System-error LED
When it is lit, the system-error LED indicates that a system-board error has
occurred.
This amber LED lights up if the SAN Volume Controller hardware detects a fatal
error that requires a new field-replaceable unit (FRU).
Note:
See MAP 5800: Light path to help you isolate the faulty FRU.
A system-error LED is also at the rear of the node.
5
6
7 8
1
2
3 4
svc00084
Figure 2. SAN Volume Controller 2145-8F2 and SAN Volume Controller 2145-8F4
operator-information panel
6
IBM System Storage SAN Volume Controller: Models 2145-8F2 and 2145-8F4 Hardware Installation Guide