IBM SA23-1325-01, Инструкция по установке и использованию

Страница: 21 / 44

Chapter 5. Setting Up the Dual Channel SCSI RAID
Enablement Card (AIX)
This chapter provides AIX-specific system hardware and software installation verification, adapter
configuration, and problem- determination procedures.
Note: If you are using the Linux operating system, see Chapter 7, “Installing and Setting Up Software for
the Dual Channel SCSI RAID Enablement Card (Linux),” on page 13 for information regarding
installing the device driver software and configuring your system. If you have another operating
system installed, refer to your operating system documentation.
Verifying the Installation
Verify the initial installation by using the following procedures:
v Verify AIX Software Installation (lslpp)
v
Verify Hardware Installation (lsdev)
Verifying AIX Software Installation
To verify that the device driver software for the Dual Channel SCSI RAID Enablement Card is installed, do
the following:
1. If necessary, log in as root user.
2. Type:
lslpp -l devices.pci.14107802*
Press Enter.
If the Dual Channel SCSI RAID Enablement Card device driver software is installed, the following is an
example of the data that displays on your screen:
Fileset Level State Type Description (Uninstaller)
----------------------------------------------------------------------------------------------------------
devices.pci.14107802.diag 5.2.0.11 C F PCI-X Dual Channel Ultra320 SCSI Adapter Diagnostics
devices.pci.14107802.rte 5.2.0.11 C F PCI-X Dual Channel Ultra320 SCSI Adapter Software
devices.pci.14107802.ucode 5.2.0.0 C F PCI-X Dual Channel Ultra320 SCSI Adapter Microcode
Note: The fileset number 5.2.0.11 displayed in the example might be different from the output displayed
on your screen.
If this information displays but you continue to have problems, or if no data displays on your screen, the
Dual Channel SCSI RAID Enablement Card device driver did not install. Return to Chapter 3, “Installing
the Device Driver Software (AIX),” on page 5. Then continue with “Verifying Hardware Installation.”
If you continue to experience problems, it may be necessary to call your system support organization.
Refer to your operating system documentation for instructions.
Verifying Hardware Installation
To verify that your system unit recognizes the Dual Channel SCSI RAID Enablement Card, do the
following:
1. If necessary, log in as root user.
2. Type:
lsdev -C | grep sis
Press Enter.
9