IBM RedBooks SAN24B-5, Инструкция по установке, обслуживанию и эксплуатации

Страница: 38 / 82

Attaching the rear brackets to the front brackets
Complete the following steps to attach the rear brackets to the front brackets.
1.
Position the right rear bracket
2
inside the right front bracket
1
, as shown
in Figure 6.
2. Attach the brackets using four 6-32 x 1/4 in. screws
4
.
3.
Adjust the brackets to cabinet depth and tighten the screws to a torque of 9
in-lb (10 cm-kg).
4. Repeat step 1 through step 3 to attach the left rear bracket
3
to the left front
bracket.
4
2
3
1
b48f003
Figure 5. Position the switch in the cabinet
2
1
3 4
b48f004
Figure 6. Position the rear and front brackets
12
SAN24B-5 Installation, Service, and User Guide