IBM RackSwitch G8332, Руководство по установке, Страница: 56 / 86

MDA lock handle
Pull to open and push to close lock handle
Replacing the MDA module
To replace the MDA module, complete the following steps.
1. Pull the MDA lock handle in the open position, and slide the module into the
MDA slot.
MDA lock handle
Pull to open and push to close lock handle
2. Push the lock handle to secure the module in place.
3. Turn on the power to the MDA module using the software commands:
From the IBM-NOS prompt, enter:
ibm-nos: /oper/mda e
Where e is enable
From the ISCLI prompt, enter:
iscli: no mda shutdown
40
IBM System Networking RackSwitch G8332: Installation Guide