IBM PS/2 70, Техническое обслуживание оборудования

Страница: 7 / 35

DID YOU HAVE TO CORRECT ANY OF THE ENABLE AND DISABLE SETTINGS?
Yes No
¦ ¦
¦ +---+
¦ ¦010¦
¦ +---+
¦ Go to "Symptom-to-FRU Index" in topic 12.0. Before replacing any
¦ SCSI devices, verify there are no duplicate SCSI ID settings.
¦
+---+
¦011¦
+---+
- Remove the Reference Diskette and restart the system.
DID THE ERROR REMAIN?
Yes No
¦ ¦
¦ +---+
¦ ¦012¦
¦ +---+
¦ If you suspect another problem, or want to run system checkout,
¦ continue with Step 014.
¦
+---+
¦013¦
+---+
Go to "Symptom-to-FRU Index" in topic 12.0.
--------------------------------------------------------------------------
+---+
¦014¦
+---+
- Insert your Reference Diskette.
- Press Ctrl+Alt+Del and check for the following responses:
1. One or two short beeps.
2. IBM logo screen appears.
DID YOU RECEIVE THE RESPONSES LISTED ABOVE?
Yes No
¦ ¦
¦ +---+
¦ ¦015¦
¦ +---+
¦ Go to "Symptom-to-FRU Index" in topic 12.0.
¦ - or -
¦ If that does not correct the problem, go to "Undetermined Problem" in
¦ topic 4.0.
¦
+---+
¦016¦
+---+
- Advance to the Main Menu.
- Press Ctrl+A and run system checkout.
Notes:
1. If the system has incorrect keyboard responses, go to "Keyboard" in
topic 9.0.
2. If the printer has incorrect responses, go to "Printer" in
topic 10.0.
3. If the display has problems such as jittering, rolling, shifting, or
being out-of-focus, go to "Display Self-Test" in topic 7.0.
4. A minimum of 512KB of memory must be active to load the diagnostic
tests.
IS THE LIST OF INSTALLED DEVICES CORRECT?
Yes No
¦ ¦
¦ +---+
¦ ¦017¦
¦ +---+
¦ Go to "Installed Devices List" in topic 2.0.
¦
+---+
¦018¦
+---+
- Run the diagnostic tests.
DID THE TESTS IDENTIFY A FAILURE?
Note: If the test stops and you cannot continue, replace the last device
being tested.
Yes No
IBM PS/2 Model 70 HMS
General Checkout
¦ Copyright IBM Corp. 1991
1.0 - 2