IBM PC 365, Руководство пользователя, Страница: 68 / 150

A PD cartridge can be loaded in the same manner described in steps 1 and
2 with the clips in the extended position.) The following is an illustration of
a properly loaded PD cartridge in a vertically placed computer.
Write-Protect
Switch
b. If you use only PD cartridges in the PD/CD-ROM drive, there is no need to
extend the clips on the tray to prevent a PD cartridge from slipping off the
tray. The spring mechanism will hold the cartridge in place.
3. If your computer is not in a vertical position, place the PD cartridge in the tray
with the label facing up and the write-protect switch in the bottom corner of the
tray, as shown in the following illustration. To do this, push the spring
mechanism into the computer with the PD cartridge. When the spring
mechanism moves into the computer, the PD cartridge will snap into place.
Spring Mechanism
Write-Protect
Switch
52
Using Your Personal Computer