IBM PC 300PL Types 6862, Руководство по установке

Страница: 51 / 112

Installing an AGP Adapter
Note: While all PC 300PL models have an AGP connector on the system board, all
PC 300GL models do not; therefore, the following instructions are for PC
300PL computers only.
Before you begin
Ÿ
Read “Electrical Safety” on page 4 and “Handling Static-Sensitive Devices”
on page 5.
Ÿ
Read the instructions that come with the optional device.
Ÿ
Turn off the computer and all other connected devices.
Ÿ
Disconnect all cables attached to the computer.
Attention:
The presence of 5 V standby power might result in damage to
your hardware unless you disconnect the power cord from the wall before
opening the computer cover.
Ÿ
Remove the computer cover (see “Disconnecting Cables and Removing the
Cover” on page 6), and lay the computer on its side.
1
Remove the screw and then remove the cover to access the two slots on the
computer wall.
The slots on the computer wall provide access to the connector(s) on the AGP
adapter for attaching external devices.
Chapter 4. Working with Adapters
37