IBM PC 300GL Types 6275, Инструкция по использованию

Страница: 83 / 154

Automatic Power On Startup Sequence
When your computer is turned on remotely, the Automatic Power On Startup
Sequence determines the order of the startup devices. The startup device is the
device that will be used to load the operating system. The settings for the
Automatic Power On Startup Sequence are used in conjunction with the automatic
power on features in your computer, such as Serial Port/Modem Ring Detect, Wake
on Alarm, and Wake on LAN.
To access the Automatic Power On Startup Sequence settings, select Start Options
from the Configuration/Setup Utility program menu, and then select Startup
Sequence
.
Wake on LAN
This setting is used to enable or disable the IBM-developed Wake on LAN feature,
which makes it possible for your computer to be powered on remotely by a network
administrator. Remote network-management software must be used to support
Wake on LAN. Examples of such software are LANClient Control Manager and
TME 10 NetFinity.
To access the Wake on LAN setting, select Advanced Power Management, and then
select Automatic Power On from the Configuration/Setup Utility program menu.
Note: To use Wake on LAN with an optional network adapter, the adapter must
support Wake on LAN and be properly configured.
Update POST/BIOS from Network
When this feature is enabled, the POST/BIOS in your computer can be updated
remotely by a network administrator. If you have set an administrator password
for your computer, it does not have to be entered by the network administrator.
Network management software is required in order to take advantage of this
feature.
To access this setting, select System Security from the Configuration/Setup Utility
program menu, and then select POST/BIOS Update.
Chapter 5. Using the Configuration/Setup Utility Program
69