8.1
8.2
Connect one end of a serial cable to the system port on your server, and the other
end to a serial port on a PC that has Microsoft Internet Explorer 6.0, Netscape 7.1, or
Opera 7.23 installed.
8
Connect an Ethernet cable from the PC to the port labeled HMC1 on the back of
the server. If HMC1 is occupied, use the port labeled HMC2.
If you are using any optional adapters, connect the cables to the appropriate
adapter connectors in the PCI slots of your server and PC.
Cable the server and access the Integrated
Virtualization Manager
CAUTION: This product is equipped with a 3-wire (two conductors and a
ground) power cable and plug. Use this power cable with a properly
grounded electrical outlet to avoid electrical shock. (C018)
Route the power cords through the rings or clamps, if available, on the back of the
server, and connect the server to a power source. Wait for the control panel on the
front of the server to display
. This might take several minutes.
01
8.3
8.4
