background image

8-4

 IBM Personal Computer User Guide

Step 3

Is anything displayed on the monitor? 

There may be a problem with the system unit if:

• An error message appears. Find the error message in the section 

“Error codes and messages” on page 8-17 and take the action listed.

• A box containing an error code and message appears. Follow the 

instructions in the message. For instructions on using Setup, see 
“Entering Setup” on page 4-4.

• The image on the screen is unreadable (the image is scrolling, blinking, 

or flashing). 

1. The monitor you attached may not be an SVGA monitor or you may 

have selected a monitor setting that your monitor does not support. 
Follow these steps to reconfigure your monitor:
a. Restart the computer. If necessary, turn the system unit off, 

pause for 15 seconds, and then turn the system unit back on.

b. When you see "Starting Windows" appear on the screen during 

startup, press F8. This opens the Microsoft Windows Startup 
Menu.

c. Select Choice 3 for Safe Mode and press Enter. This starts your 

computer using the factory configuration settings.

d. When your computer has completed startup, double-click on the 

My Computer desktop icon.

e. In the My Computer window, double-click on the Control Panel 

icon.

f. In the Control Panel window, double-click on the Display icon.

g. In the Display Properties window, click on the Settings tab.

h. See “Customizing display properties” on page 2-3 for 

instructions on selecting new monitor settings. If using a VGA 
monitor, select 640 x 480 pixels in the Screen area and 16 
colors in the palette.

i. Restart the computer. Your computer may take a little longer 

than usual to restart.

2. If the monitor you attached is a VGA monitor and not an SVGA 

monitor (older monitors may be VGA), detach the VGA monitor and 
attach an SVGA monitor. Using an SVGA monitor allows your 
computer system to take full advantage of Windows video function.

Yes

Содержание NetVista 6266

















































































































































Отзывы: