IBM Netfinity ServeRAID-4H Ultra160, Справочник пользователя

Страница: 108 / 192

a :\support\ipshahto
where a is the diskette drive letter.
v
If you are using the CD, type the following command from a Windows 2000
command line:
d :\programs\winnt\cluster\support\ipshahto
where d is the CD-ROM drive letter.
Running the program makes all the shared logical drives available for access
by Server A.
3. Click Start
→
Settings
→
Control Panel.The Control Panel window opens.
4. Double-click Computer Management. The Computer Management window
opens.
5. On the left side of the window, click to expand the Storage icon; then, click
Disk Management. The Disk Signature and Upgrade Wizard window opens.
6. To assign disk signatures for the shared disks, click Next.
7. Microsoft Cluster Service using Windows 2000 requires you to set shared
logical drives to Basic Disk. To do this, click Cancel in the Upgrade Disks
panel of the window.
8. Format all shared logical drives to NTFS (NT File System), assign volume
labels, and specify drive letters for each.
Notes:
a. It is helpful if part of the volume label that you assign contains the drive
letter that you assigned to the drive, such as DRIVE E.
b. If you want to use the disk in a cluster, create only one partition on the
disk. Make the partition the full size of disk and format the partition to
NTFS.
c. Make sure that all shared logical drives are the type Basic Disk. If they are
marked Dynamic Disk, change them to Basic Disk by doing the following:
1) With the right-mouse button, click the Disk icon at the bottom of the
Disk Management window (see Figure 25 on page 95).
2) Click Revert to Basic Disk.
94
IBM
®
Netfinity
®
User’s Reference: ServeRAID
™
-4H Ultra160 SCSI Controller