IBM Netfinity 4500R, Руководство по установке

Страница: 17 / 60

Chapter 2. Installing Options
7
Installing adapters
The following illustration shows the installation of an adapter.
To install an adapter:
Attention: When you handle Electrostatic Discharge-Sensitive devices (ESD), take
precautions to avoid damage from static electricity. For details on handling these
devices, refer to the following Web site and use a search term of ESD:
http://www.ibm.com/
1. Review the safety precautions listed in “Safety” on page v.
2. Turn off the server. Disconnect the signal cables; then disconnect the power cords.
3. Remove the cover.
4. Select a slot and remove the expansion-slot cover.
5. Install the adapter in the slot; then, install the retaining screw.
6. Install the cover.
7. Reconnect the cables and power cords; then, turn on the server.
Adapter
Expansion-slot cover