IBM N Series Скачать руководство пользователя | Manualshive

Страница: 4 / 62

background image

iv

10G Cluster-Mode Switch Installation Guide

Notices

This information was developed for products and services offered in the U.S.A.

IBM may not offer the products, services, or features discussed in this document in other countries. Consult
your local IBM representative for information on the products and services currently available in your area.
Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM
product, program, or service may be used. Any functionally equivalent product, program, or service that
does not infringe on any IBM intellectual property right may be used instead. However, it is the user’s
responsibility to evaluate and verify the operation of any non-IBM product, program, or service.

IBM may have patents or pending patent applications covering subject matter described in this document.
The furnishing of this document does not give you any license to these patents. You can send license
inquiries, in writing to:

IBM Director of Licensing
IBM Corporation
North Castle Drive
Armonk, N.Y. 10504-1785
U.S.A.

For additional information, visit the web at: http://www.ibm.com/ibm/licensing/contact/

The following paragraph does not apply to the United Kingdom or any other country where such
provisions are inconsistent with local law:

INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION “AS
IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied
warranties in certain transactions, therefore, this statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changes are periodically
made to the information herein; these changes will be incorporated in new editions of the publication. IBM
may make improvements and/or changes in the product(s) and/or the program(s) described in this
publication at any time without notice.

Any references in this information to non-IBM web sites are provided for convenience only and do not in
any manner serve as an endorsement of those web sites. The materials at those web sites are not part of the
materials for this IBM product and use of those web sites is at your own risk.

IBM may use or distribute any of the information you supply in any way it believes appropriate without
incurring any obligation to you.

Any performance data contained herein was determined in a controlled environment. Therefore, the results
obtained in other operating environments may vary significantly. Some measurements may have been made
on development-level systems and there is no guarantee that these measurements will be the same on

«
...
2
3
4
5
6
...
»

Содержание N Series































































Отзывы:

Нет отзывов

Похожие инструкции для N Series

Intesis IN701-KNX Series

Бренд: HMS Networks Страницы: 48

Бренд: NetLink Страницы: 68

Бренд: Ubee Страницы: 99

LoRaWAN FMLR PicoCell

Бренд: Miromico Страницы: 8

Бренд: RTA Страницы: 78

Бренд: Ubee Страницы: 6

Бренд: Gree Страницы: 31

Бренд: Pfeiffer Vacuum Страницы: 20

Бренд: SignaMax Страницы: 54

MiniHub Pro WLRRTES-102 TBMH110

Бренд: Browan Страницы: 14

Бренд: CheckVideo Страницы: 2

Бренд: Avaya Страницы: 360

Бренд: Raisecom Страницы: 197

SecPath M9000-AI

Бренд: H3C Страницы: 39

Бренд: ICC Страницы: 103

Atlona AT-VGW-HW-20

Бренд: Panduit Страницы: 12

Бренд: ZKTeco Страницы: 12

Бренд: NETGEAR Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды