17
ENGLISH
FRANÇAIS
ESPAÑOL
POR
TUGUESE
APPENDIX
Troubleshooting
If you have a problem setting up or using your monitor, you may be able to solve it yourself. Before calling your retailer or
IBM try the suggested actions that are appropriate to your problem.
Problem
Possible Cause
Suggested Action
Reference
Screen is blank
and power
indicator is off.
No power to monitor.
Ensure that the electrical outlet and the
monitor are both switched on.
Check that the power cord is firmly
plugged into the monitor and the electrical
outlet.
If the power cord plug has a removable
fuse, replace it.
Try another power cord.
Try another electrical outlet.
Connecting your
monitor
on page 7
Screen is blank
and power
indicator is
steady green.
Brightness and
Contrast may be too
low.
Adjust brightness and contrast.
User Controls
on
page 8
Screen is blank
and power
indicator is
steady orange,
flashing orange/
green or flashing
orange.
Display mode of the
computer is outside
the range of the
monitor.
Reconfigure the computer to use a
supported display mode.
Further Information
on page 13
The monitor is in the
Power Management
Standby, Suspend or
Off state.
Press any key on the keyboard or move
the mouse to restore operation.
Check the Power Management software
on your computer.
Ensure the computer is switched on.
Further Information
on page 13
The monitor is
working but there is a
problem with the
signal cable.
Check that the video signal cable is firmly
connected to the computer.
Check that no pins are bent in the signal
cable connector.
Connecting your
monitor
on page 7
USMM75Bk.book : Emm75bod.fm Page 17 Friday, September 12, 1997 7:30 PM