M768MR Mainboard User’s Manual
Peripheral Setup Page
This page sets some of the parameters for peripheral devices
installed on the system.
AMIBIOS SETUP – PERIPHERAL SETUP
©1998 American Megatrends, Inc. All Rights Reserved
OnBoard FDC Enabled
OnBoard Sound/Modem Enabled
OnBoard Serial Port1 3F8h/COM1
OnBoard Serial Port2 2F8h/COM2
Serial Port2 Mode Normal
IR Duplex Mode Full
OnBoard Parallel Port 378h
Parallel Port Mode Normal
Parallel Port IRQ 7
Parallel Port DMA N/A
OnBoard IDE Both
ESC : Quit
: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load Optimal values
F7 : Load Best performance values
Onboard FDC
Use this item to enable or disable the onboard
floppy disk drive interface.
Onboard Sound/
Modem
Use this item to enable or disable the onboard
audio/modem chip.
Onboard Serial
Port1
Use this item to enable or disable the onboard
serial port COM1/3, and to assign a port
address.
Onboard Serial
Port2
Use this item to enable or disable the onboard
serial port COM2/4, and to assign a port
address.
Serial Port2 Mode
Use this item to allocate the resources of the
second serial port. Under Normal, the
resources are allocated to the onboard serial
port. Under ASKIR or IrDA, the resources are
allocated to the onboard IR port.
IR Duplex
Use this item to define if the optional infrared
port is full-duplex or half-duplex.
Onboard Parallel
Port
Use this item to enable or disable the onboard
parallel port LPT1, and to assign a port address
32
