3.
For installation in a four-post rack or a cabinet, install the support shelf on the
rear posts as shown in Figure 5 on page 7.
Figure 5: Attaching Four-Post and Cabinet Support Shelf
Rear rack uprights
g036094
Step 3: Install the Device
Because of the device's size and weight, we recommend you install the device using
a mechanical lift. The procedure for installing the device depends on whether you
use a mechanical lift:
■
Install the Device Using a Lift on page 7
■
Install the Device Without a Mechanical Lift on page 10
Install the Device Using a Lift
1.
Ensure the rack is in its permanent location and is secured to the building. Ensure
that the installation site allows adequate clearance for both airflow and
maintenance. For details, see the
IBM Ethernet Appliance J36S Hardware Guide
.
2.
Load the device onto the lift, making sure it rests securely on the lift platform
(see Figure 6 on page 8).
Step 3: Install the Device
■
7
Step 3: Install the Device
