Install the Device Without a Mechanical Lift
To install the device without a mechanical lift:
■
■
Lift the Chassis into the Rack on page 12
■
Reinstall Components on page 13
Remove Components
To make the Ethernet appliance light enough to install manually, you first remove
most components from the chassis as shown in Figure 9 on page 10 and Figure 10
on page 11.
■
Power supplies
■
Switch Fabric Board (SFB)
■
Routing Engine
■
I/O Cards (IOCs)
■
Network Processing Cards (NPCs)
■
Services Processing Cards (SPCs)
■
Fan tray
Figure 9: Components to Remove from the Front of the Device
10
■
Step 3: Install the Device
IBM Ethernet Appliance J36S Getting Started Guide
