IBM InfoWindow II 3153, Руководство пользователя

Страница: 70 / 89

53
EXECUTE: Prnt Sc
F1
Quick F2
Genrl F3
Displ F4
Kybd F5
Keys F6
Ports F7
Host F8
Print F9
Emul F10
Tabs F11
AnsBk F12
Prog Print
Exec
Parameters Parameters
Save Terminal Recall Terminal Default Terminal
Save Session Recall Session Default Session
Reset Terminal Reset Session Reset Ports
Clear Screen Default Session UDKs
Choices Choices
User Enter Key to Execute Action
Select Select
↑ → ↓ ←
: Parameter
Enter/S-Enter : Next/Prev Choice Exit : Setup Key
All of the parameters in this menu are action parameters.
Terminal
parameters affect all settings, including the emulation.
Session
choices affect only settings that relate to the chosen session. In dual session
(host) mode, there are two independent sets of session parameters (Session 1
and Session 2). To toggle between sessions, use the
Ctrl-Enter (Num)
keystroke.
Save Terminal:
Save all settings in non-volatile (permanent) memory, including
those associated with the session selected.
Reset Terminal:
All terminal parameters are initialized. It also performs reset
pages and default modes.
Recall Terminal: Revert to all terminal and session settings that were saved in
nonvolatile memory. A “Reset Terminal” is also performed. This is referred
to as a hard reset and is equivalent to turning the terminal off and back on.
Default Terminal:
Load all defaults for the terminal and session, including the
emulation. A “Reset Terminal” is also performed.
Save Session:
Save all the settings associated with the chosen session.
Reset Session:
Initialize all session settings. This is also referred to as a
“Soft-Reset.” Perform page-resets and default modes. “Mode” specifies the
parameters used by a session which are not selectable through Setup such
as Insert-Mode, Split-Screen, and Graphics-Mode.
Recall Session:
Load the previously saved settings associated with the chosen
session. A “Reset Session” is also performed.
Default Session:
Load all defaults associated with the session selected.
Reset Ports:
Clear the transmit buffers for the host and printer port, and
receive buffer for the host port. Unlocks the keyboard and clears its buffer
data.