IBM ILC300, Руководство пользователя

Страница: 29 / 62

Chapter 5. Using the menus
To open the menus, press the menu button on the keypad or remote. (The menus
automatically close after 60 seconds if no buttons are pressed.) The Main menu
appears. Use the arrow buttons to move up and down to highlight the desired
submenu, then press the
Select button.
To change a menu setting, highlight it, press Select , then use the up and down
arrow buttons to adjust the value, select an option using radio buttons, or turn the
feature on or off using check boxes. Press
Select to confirm your changes. Use the
arrows to navigate to another setting. When your adjustments are complete,
navigate to
Exit , then press Select to go to the previous menu; press the Menu
button at any time to close the menus.
Dots appear before the menu name. The number of dots indicate the menu’s level,
ranging from one (the Main menu) to four (the most nested menus).
The menus are grouped by usage:
v
The Picture menu provides image adjustments.
v
The Settings menu provides set-up type adjustments that are not changed often.
v
The About menu provides a read-only display of information about the
projector and source.
Certain menu items may be hidden until a particular source is connected. For
example,
Sharpness is only available for video sources and will be hidden when a
computer source is active. Other menu items may be grayed out when they are not
available. For example,
Brightness is grayed out until an image is active.
Picture menu
To adjust the following five settings, highlight the setting, press Select , use the up
and down arrows to adjust the values, then press select to confirm the changes.
Keystone: adjusts the image vertically and makes a squarer image. You can also
adjust keystone from the keypad.
Contrast: controls the degree of difference between the lightest and darkest parts
of the picture and changes the amount of black and white in the image.
© Copyright IBM Corp. 2003
19