IBM IBM-3455, Инструкция по установке и эксплуатации

Страница: 19 / 38

Making Calls
1.
Pick up the handset from the base.
2. Press
P
. The display will show
"CONNECTING". Once the IBM-3455 has
acquired a line the display will show the
channel that it is using (eg. CHANNEL 50).
Wait until you hear a dial tone.
3. Dial the number you wish to dial.
Note: You can pre-dial the number before you
press the
P
key. The number displayed will
be dialed once
P
is pressed.
4. After 15 seconds of the line being active
the display will show the call timer.
5. When you are finished talking, press the
P
key or place the unit back into the
base to end the call.The call timer will
display for a short time after the call has
finished.
Note: The CHARGE light on the base will illuminate when the line is active.
Additional Options
BASIC OPERATION
1 2 3
4 5 6
7 8 9
0 #
OPER
WXYZ TUV PQRS
MNO JKL GHI
DEF ABC
NEW
CALL
VOLUME
REDIAL
PAUSE
FLASH CHAN
TONE
CID
DELETE
MEM
MENU
HOLD
18
Delete Key
Dial Pad
Talk Key
Temporary
Tone Key
Flash Key
Redial Key
Adjust the volume in the earpiece Press
L M
during a call until the desired volume level is reached.
Switch to temporary tone dialing Press the
*
key after the phone is in use. The phone will remain in
tone dialing mode for the duration of the call.
Delete a pre-dialed number or digit Press
R
, wait 10 seconds, or place the handset back on the base.
Receive a call waiting call Press
G
to go to the new caller.
Press
G
again to go back to the original caller.
Place a call on hold Press the
D
key.
Press
P
to pick up the line on hold.
To Do This
Up/Down Keys