IBM H3V, Руководство по установке, эксплуатации и обслуживанию

Страница: 111 / 141

1
Threader
intermediate
gear
2
Threader
mechanism
gear
3
Loader motor
worm gear
5.
As the leader pin is secured in the cartridge, you should hear the leader pin
retention spring clips click into place. If you do not hear the click, continue
rolling until the threader intermediate gear (
1
in Figure E-12) stops. The
LBA is in the correct position.
Note: Be sure to keep tension on the tape as the LBA is drawn into the
cartridge.
6. Rotate the loader intermediate gear (
1
in Figure E-13) clockwise as viewed
from the front of the drive until it stops. This releases the LBA leader pin.
7. Rotate the threader motor worm gear (
3
in Figure E-13) counterclockwise
until the leader block is in front of the Read/Write head. This moves the LBA
out of the cartridge.
1
Loader motor worm gear
2
Leader block assembly (LBA)
8. Rotate the loader motor worm gear (
3
in Figure E-13) counterclockwise as
viewed from the front of the drive until it stops.
3
1
2
a82hd00
3
Figure E-12. Drive with cover removed to reveal gear train.
1 2
a82hd00
4
Figure E-13. Leader Block Assembly (LBA)
Appendix E. Information for Trained Service Personnel
E-13