IBM Gigabit Fibre Channel PCI, Инструкция по установке и использованию

Страница: 17 / 52

8. The Install Additional Device Software panel highlights the SOFTWARE to install
option.
9. Press F4 to display a list of the device software you can install.
10. To display the Find window, type:
/
11. Type:
devices.pci.df1000f9
Press Enter. The system finds and highlights this device driver software and
displays output similar to the following example:
4.3.3.0 devices.pci.df1000f9 ALL
12. Press PF7 to select the device software, and press Enter.
13. The Install Additional Device Software screen displays. Entry data fields are
automatically updated. Press Enter to accept the data.
14. The ARE YOU SURE window displays. Press Enter to accept the data.
15. The COMMAND STATUS window appears.
v
The term
RUNNING
is highlighted to indicate that the install and configure
command is in progress.
v
When
RUNNING
changes to
OK
, scroll down to the bottom of the page and locate
the Installation Summary.
v
After a successful installation,
SUCCESS
displays in the Result column of the
summary at the bottom of the page.
16. Remove the installation media from the drive.
17. Press F10 to exit SMIT.
18. Go to the adapter installation procedure, “Chapter 5. Installing the Gigabit Fibre
Channel PCI Adapter” on page 21.
Chapter 3. Installing Device Driver Software
7