IBM G8316, Руководство по установке

Страница: 41 / 84

4
2
6
8
6. Use the M3.5 screws to secure the rear brackets to the front brackets. Torque
the screws to approximately 1.1 Nm +/- 0.1 Nm (10 inch-pounds).
9
10 11
3
7. Connect all the cables.
8. Initialize the switch, see Chapter 4, “Initializing the RackSwitch,” on page 43.
Attention: If this is a switch replacement, make sure the VPD is updated to
avoid losing the licensed electronic entitlement data of the RackSwitch. For
more information, see “Configuring Vital Product Data after a switch
replacement” on page 40.
Installing the 1U air duct option in a rack
The RackSwitch supports an optional 1U air duct to maximize air flow conditions in
a 19" rack. For 1U air duct option part numbers, see the Chapter 6, “Replaceable
switch parts,” on page 49 section.
Mounting kit components
The 1U air duct option ships with:
v One 1U air duct unit
v
One 1U air duct mechanical assembly mounting kit
v One power cord
Chapter 2. Installing the RackSwitch and options
25