IBM Flex System FC3052, Руководство пользователя

Страница: 15 / 30

IBM Flex System FC3052 2-port 8Gb FC Adapter User’s Guide
7
Chapter 4. Solving problems
If you cannot locate and correct a problem by using the information in this section, see
Appendix A, “Getting help and technical assistance,” on page 9.
Running POST
To ensure that it is fully operational, the adapter processes a series of tests during
power-up or a restart (power-on self-test, or POST). These tests take approximately 1
minute to complete. The management module reads the test results and displays them
for you. During normal operation, these tests are completed without error, and the
green OK LED is lit. However, if the adapter fails POST, the amber adapter error LED
and the system-error LED on the chassis are lit.
Parts listing
Replaceable components are of three types:

Tier 1 customer replaceable unit (CRU) : Replacement of Tier 1 CRUs is your
responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged
for the installation.

Tier 2 customer replaceable unit (CRU) : You may install a Tier 2 CRU yourself
or request IBM to install it, at no additional charge, under the type of warranty
service that is designated for your server.

Field replaceable unit (FRU) : FRUs must be installed only by trained service
technicians.
For information about the terms of the warranty, see the Warranty Information
document.
The replaceable components in the following table are Tier 1 CRUs. If other
components require replacement, see the documentation that came with those devices
for instructions.
Part CRU number (Tier 1)
IBM Flex System FC3052 2-port 8Gb FC Adapter 95Y2378