IBM Flatpanel Speakers, Руководство пользователя

Страница: 12 / 34

Mounting the speakers on IBM monitors with accessory
clips
Follow these instructions if your IBM monitor has provisions for using the
accessory bar.
1. Remove the rubber plugs from each speaker and install the T-Clips by
inserting the tab into the slot vertically and rotate, as shown in the
following illustration.
2. Snap the open ends of the T-Clips onto the accessory bar at the desired
height (repeat for other side).
3. Insert the accessory bar with attached T-Clips to the speaker clips on the
sides of your monitor, as shown in the following illustration.
4. Continue with the set up as described in “Connecting the flatpanel
speakers to your computer” on page 1-6.
1-4
IBM Flatpanel Speakers: User’s Guide