[edit]
root@#
set system root-authentication plain-text-password
New password:
password
Retype new password:
password
6.
Configure an administrator account on the device. When prompted, enter the
password for the administrator account.
[edit]
root@#
set system login user admin class super-user authentication
plain-text-password
New password:
password
Retype new password:
password
7.
Commit the configuration to activate it on the device.
[edit]
root@#
commit
8.
Log in as the administrative user you configured in step 6.
9.
Configure the name of the device. If the name includes spaces, enclose the name
in quotation marks (“ ”).
configure
[edit]
admin@#
set system host-name
host-name
10.
Configure the IP address and prefix length for the device’s Ethernet interface.
[edit]
admin@#
set interfaces fxp0 unit 0 family inet address
address/prefix-length
11.
Configure the traffic interface.
[edit]
admin@#
set interfaces ge-0/0/0 unit 0 family inet address
address/prefix-length
admin@#
set interfaces ge-0/0/1 unit 0 family inet address
address/prefix-length
12.
Configure the default route.
[edit]
admin@#
set routing-options static route 0.0.0.0/0 next-hop
gateway
13.
Configure basic security zones and bind them to traffic interfaces.
[edit]
admin@#
set security zones security-zone trust interfaces ge-0/0/0
admin@#
set security zones security-zone untrust interfaces ge-0/0/1
14.
Configure basic security policies.
[edit]
admin@#
set security policies from-zone trust to-zone untrust policy
policy-name
match source-address any destination-address any application any
root@#
set security policies from-zone trust to-zone untrust policy
policy-name
then permit
20
■
Step 6: Perform the Initial Software Configuration
IBM Ethernet Appliance J34S Getting Started Guide
