IBM EtherLink XL, Руководство пользователя

Страница: 33 / 72

4
C
HANGING
C
ONFIGURATION
This chapter describes how to display and change
configuration settings for the 3C905B-TX adapter using
the 3Com NIC Diagnostics program.
Before you change the settings, contact your system
administrator.
Configuration Settings
Table 4-1 lists each configuration option, the default
setting, and the available settings.
.
CAUTION: Before setting the 3C905B-TX adapter for
full-duplex, make sure that the switch port is also set to
full-duplex or supports full-duplex and auto-negotiation
(NWay).
Full-duplex at 100 Mbps improves the performance of
switch (hub) connections. The 3C905B-TX adapter
supports full-duplex at 10 or 100 Mbps. If the switch
supports the NWay feature and full-duplex, the 3C905B-TX
adapter automatically runs in full-duplex.
Table 4-1 Option Settings
Option Default Setting Available Settings
Network Driver
Optimization Normal Minimize CPU Utilization, Maximize
Network Performance, Normal
Full-Duplex Auto Select Enabled, Disabled, Auto Select
Boot PROM Disabled Disabled, 8K, 16K, 32K
Media Type Auto Select 100BASE-TX, 10BASE-T, Auto Select
PACE Disabled Enabled, Disabled
NDIS Driver Speed None 100 Mbps, 10 Mbps (Windows NT only),
N/A (Windows 95)
Remote Wake-Up No Yes, No