IBM ESS 5000 SC Series Скачать руководство пользователя | Manualshive

Страница: 54 / 78

background image

Parity of None

Stop bits of 1

3. For the serial terminal to show an FSP login screen, press any key on the keyboard. Log in using the

ASMI credentials:
• username: admin
• password: Serial number of server

4. Manually power on the server by pressing the power button on the front.

• After powering on the server, the terminal emulator (for example, PuTTY) will display messages

during the system boot.
If there is no output, press the Up Arrow key and the Down Arrow key a few times to make the

terminal respond.

• After the terminal starts showing output as the system boots, pay close attention to detect when the

system reaches the petitboot menu (it takes a few minutes before it discovers the disks):
– System pauses the boot process for a few seconds when it gets the petitboot menu.
– Immediately press the Up Arrow key and/or the Down Arrow key a few times while in the

petitboot menu.

– Boot process stops indefinitely and the user will be able to interact with the petitboot menu and

choose a boot option.

5. In the petitboot menu, press the Up Arrow key and/or the Down Arrow key to select the redhat boot

option:
• Do not select the

Rescue

option.

• If several redhat boot options (besides the Rescue option) are shown, select the newest available.
• Press Enter and the server will start to boot the OS. You should see the output going across the

screen and come to a login.

6. Log in using the SSR credentials:

• username: essserv1
• password: <serial number of server>
Note: You must set the terminal variable correctly before attempting to run any commands. Within

PuTTY do the following:

export TERM=xterm

Continue with the rest of the flow (using

essutils

) to check the EMS and set the management IP

address.
If there is an issue with the boot process, you will need to call the technical support.

EMS login issues
Note: The default password is

ibmesscluster

and must be changed after the first login. Customers

should be advised to change the password once the SSR task is complete.
If you face issues logging in with username: essserv1 and password: <serial number of server>, perform

the following steps:
• Log in as a root user:

– username: root
– password: ibmesscluster
Note: You should only login as root when you cannot log in as essserv1 and it is an emergency. The root

password is set to expire so you will be prompted to change immediately.

• Run

essutils

manually by typing

essutils

and press Enter.

42 IBM Elastic Storage System 5000: Hardware Guide

«
...
52
53
54
55
56
...
»

Содержание ESS 5000 SC Series















































































Отзывы:

Нет отзывов

Похожие инструкции для ESS 5000 SC Series

Бренд: Quest Engineering Страницы: 540

Бренд: Seagate Страницы: 21

Terascale ST4000NC000

Бренд: Seagate Страницы: 37

2,5" EXTERNAL HARD DRIVE KIT

Бренд: Intenso Страницы: 94

Бренд: MSW Страницы: 46

Бренд: Compaq Страницы: 139

Бренд: Bull Страницы: 50

Бренд: SANHO Страницы: 24

Бренд: Addonics Technologies Страницы: 8

Бренд: Home Decorators Collection Страницы: 4

Бренд: Verbatim Страницы: 4

Бренд: Verbatim Страницы: 6

Store'n'Go SuperSpeed USB 3.0

Бренд: Verbatim Страницы: 16

Gigabit Ethernet Hard Drive

Бренд: Verbatim Страницы: 60

Бренд: Black Box Страницы: 20

Бренд: Black Box Страницы: 24

Бренд: Promise Technology Страницы: 68

Бренд: Datex Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды